Casio EX-ZS15 - Manual (Page 86)

86
Other Settings (Set Up)
Use this procedure to specify the time displayed by the camera for your home city
and destination.
1.
Touch “Time”.
2.
Touch “Home” or “Destination”.
This will configure the time setting of the location you touched in the previous
step.
Procedure
MENU * Setup * Timestamp
You can configure the camera to stamp the recording date only, or date and time in
the lower right corner of each snapshot.
• Once date and time information is stamped into a snapshot, it cannot be edited or
deleted.
Example: July 10, 2012, 1:25 p.m.
• Even if you do not stamp the date and/or time with Timestamp, you can do so later
using some printing application.
• Stamping is performed in accordance with the date and time settings (page 87) and
the display style settings (page 87).
Selecting the Time Display
Time Stamping Snapshots (Timestamp)
Date 2012/7/10
Date&Time 2012/7/10 1:25pm
Off No stamping of date and/or time