MF Digital DVD-QuadraPRO (Rev: 08/01/02) - Manual (Page 54)

CD-3706/P Operator’s Guide
Document Revision: 030501.1 DVD-QuadraPRO LX Operator’s Guide
Document Revision: 070102
Page 53
Firmware Updates
From time to time the QuadraPRO’s internal “firmware” may need
updating to add new features or improve existing functions. Firmware is
easily updated by loading a “Firmware Update CD” into the system. The
latest version of firmware will be available for downloading to your
computer from the MediaFORM web site: www.mediaform.com
Once a firmware image file is downloaded, a “Firmware Update CD” can
then be written using a computer, a CD-R/RW recorder, and most popular
premastering programs (such as: Adaptec Easy CD Creator and Toast,
CeQuadrat WinOnCD, Ahead Nero, NTI CD-Maker, and others). Refer to
your premastering software documentation for details on how to record a
disc from an image file.
After having created a “Firmware Update CD”, perform the following steps
to update the QuadraPRO firmware:
• From the main operating screen depicted below:
S E L E C T C O P Y O R C O M P A R E
• Load the “Firmware Update CD” into the top CD-R/RW recorder.
• Turn off the power to the QuadraPRO.
• The system will startup:
M F I N C .
D U P L I C A T I O N M A D E E A S Y
• You will see the “preparing system” screen:
P R E P A R I N G S Y S T E M
• You will see the upgrade firmware screen:
U P G R A D E F I R M WA R E
[ S T O P ] = N O [ S T A R T ] = Y E S
• Select “Yes” to upgrade the firmware.
• Upon completion, the system will automatically reboot.
• Remove the CD at this time.
• If the “upgrade firmware” screen appears again, select “No” and remove
firmware disc.
• You will then be returned to the main operating screen:
S E L E C T C O P Y O R C O M P A R E