Page 20 – MF Digital DVD-QuadraPRO (Rev: 08/01/02) User Manual
Page 21

CD-3706/P
Operator’s Guide
Document Revision: 030501.1
DVD-QuadraPRO LX Operator’s Guide
Document Revision: 070102
Page 20
P R I N T E R A L I G N M E N T ?
S T O P = N O S T A R T = Y E S
• Please see the Aligning the Printer section of this manual on page 46
for further instructions.
• Press the “5” key on the keypad. The screen will now read:
S T A R T I M P O R T I N G A U D I O ?
[ S T O P ] = N O [ S T A R T ] = Y E S
• By using the Audio Track Import feature, audio compilation discs
can be created one track at a time from one or more masters.
• Manually place an audio master disc into drive number 1.
• Press the “Start/Yes” key
• Press the number of the track you wish to import and press the
“Start/Yes” key. Only one track may be imported at a time. All of the
tracks will create one master image on the hard drive.
• Once you have imported all of the tracks, copy the image you just
created from the hard drive as you normally would.
• Press the “6” key on the keypad. Something similar to the following
will be displayed in sequence:
1 ( 0 , 3 ) P I O N E E R D V D - R 1
V : m d 0 0 R I D 0 0 0 0 0 0 0 0 0 0 V :
This display is the device information for each of the recorders
installed in the QuadraPRO. This includes their model name,
firmware version, and unique SmartRID code. (SmartRID applies to
24X SmartDRIVE CD-ROM drives.)
• Press the “7” key on the keypad. The screen will now read:
C L E A R H D ?
• Press the START/YES key to clear the hard drive.
If the STOP/NO key is pressed you will be prompted to set the
“System Time.”
S E T S Y S T E M T I M E ?