MF Digital OptiEC Pro 6 User Manual
Page 33
I
In
nt
te
er
rf
fa
ac
ci
in
ng
g
I
In
nf
fo
or
rm
ma
at
ti
io
on
n
2
29
9
B. 6-PIN MINICIRCULAR AUXILIARY INTERFACE
The 6-pin minicircular auxiliary interface is used for connecting
the printer with auxiliary equipment such as a CD transporter/
auto-loader.
Pin assignments are as follows:
Uses 5v logic @ 5mA
Pin Number
Signal Description
1
Busy - Output is high when the printer is busy
or moving the Disc Tray.
2
Tray Out - Output is high when the Disc Tray
is fully ejected.
3
Tray In - Output is high when the Disc Tray is
fully inserted.
4
CD In - Output is high when the Disc Tray is
in and a CD is present.
5
Ground.
6
Tray In/Out - A low input moves the Disc
Tray in if it is out, and out if it is in.
TABLE A-1: Auxiliary Interface Pin Assignments
NOTE: Pins 1-4 are low if the printer is plugged in but the power has
been turned off using the printer’s Power Button
5
6
4
3
2
1