MF Digital OptiEC Inkjet Manual User Manual
Page 9
OptiPrinter CD/DVD Inkjet Printer
ZZ 004 805 - 9 -
SECTION 3: CONNECTING YOUR OPTIPRINTER
1.
Connect the USB cable port on the computer and on the printer.
2.
Connect the power cable to the printer and plug into the power supply.
3.
Power up the OptiPrinter by pressing the Power Button (see Fig. 1)
4.
The Power Button light and the Resume Button light will be illuminated (see Fig .1)
Note:
When you power up your OptiPrinter, the CD tray will either eject automatically or remain
inside the printer.
SECTION 4: BUTTONS & LIGHTS
The Printer Buttons let you turn the printer on & off, cancel a print job, or resume printing. The lights
give you visual clues about the status of the printer.
4.1 Cancel Button
Pressing the Cancel Button cancels the current print job.
4.2 Print Cartridge Status Light
This light flashes when a print cartridge is low in ink or incorrectly installed, or the printer’s top
cover is open.
4.3 Resume Button & Light
This light is illuminated when you first power up your OptiPrinter, and indicates that there is no
CD in the printer.
This light will also flash when an action is required such as loading a CD or clearing a CD jam.
When the action is completed, press the Resume Button to continue printing.
4.4 Power Button & Light
The Power Button turns the printer on & off. It may take a few seconds for the printer to turn on
after you press the Power button. The green light flashes when the printer is processing.
CD Tray Button
Cancel Button
Print Cartridge Status Light
Resume Button & Light
Power Button & Light
Fig. 1