beautypg.com

System startup – MF Digital 5200 Live Series EventCD User Manual

Page 9

background image

9

System Startup

Before operation can begin it is necessary to review a few details.

Plug one end of the supplied power cord into the upper receptacle at the rear

of the unit.

Next, verify that the voltage selector switch is set correctly. It is located

between the two power receptacles. The 5200 Series supports both 115 VAC
and 230 VAC at 50 ~ 60 Hz. Please confirm that the appropriate voltage (115
VAC for North America) has been selected.

Make sure you power on the unit using the primary power switch (located on

the rear of the unit) and secondary power switch (located on the power
supply).



CAUTION

Always use properly grounded

receptacles or severe damage to

your system may result. The use of a

surge protector or Uninterruptible

Power Supply (UPS) is highly

recommended.