Maxim Integrated 73M1822/73M1922 Control Module - Manual (Page 20)

73M1822/73M1922 Control Module User Guide UG_1x22_053
20 Rev. 1.0
5.2.13 M1X22_DIAL_ABORTED
This event is generated when a pulse dial session is aborted or canceled by the user application.
Parameters
Data Type Name Description
unsigned int event_id M1X22_DIAL_ABORTED .
unsigned int channel_id Channel ID.
unsigned int event_cnt Number of events that remain in the queue.
unsigned int event_data1 N/A.
unsigned int event_data2 N/A.
unsigned int event_data3 N/A.
unsigned int event_data4 N/A.
5.2.14 M1X22_SYNC_RECOVERED
This event is generated after a successful recovery from the barrier sync failure.
Parameters
Data Type Name Description
unsigned int event_id M1X22_SYNC_RECOVERED .
unsigned int channel_id Channel ID.
unsigned int event_cnt Number of events that remain in the queue.
unsigned int event_data1 N/A.
unsigned int event_data2 N/A.
unsigned int event_data3 N/A.
unsigned int event_data4 N/A.
5.2.15 M1X22_GPIO_INTERRUPT
This event occurs when an input GPIO interrupt is triggered. The “data1” field contains the source GPIO
that generates the interrupt.
Parameters
Data Type Name Description
unsigned int event_id M1X22_GPIO_INTERRUPT .
unsigned int channel_cid Channel CID.
unsigned int event_cnt Number of events that remain in the queue.
unsigned int event_data1 The GPIO that triggers the interrupt event.
unsigned int event_data2 N/A.
unsigned int event_data3 N/A.
unsigned int event_data4 N/A.