Make Noise Analog Memory - Manual (Page 8)

8
Connecting 1 Analog Memory to
Pressure Points/ BRAINS
Connect one of the remaining 3 connectors to the 10 pin header on
the Pressure Points that is marked “EXPND.” You will need to re-
move all 4 of the small black “jumpers” that are covering the pins of
this header before you attach the EXPAND CABLE. Maintain proper
orientation of the cable, keeping the Red Stripe DOWN. Connect
each Analog Memory to the Pressure Points with which you wish to
control it.
Now connect the EXPAND Cable to the 10 pin header on the BRAINS
marked “Points 1-4.”
Please see the Pressure Points and BRAINS manuals for details on
proper jumper settings and connection for Pressure Points/ BRAINS,
and follow those instructions.
NOTE: Power Cables removed in photo for clarity.