Longshine LCS-GS9428 - Manual (Page 21)

21
Tag based QoS:
The Tag based QoS decides packet priority according to the tags that adding
on the packets.
To configure Tag Based QoS configuration:
1. Select
“Tagged” in the “Mode” column for those ports that are going
to perform tag-based QoS. Click the “Apply” button.
2. Click the “Tag priority” button. The “Tag Priority Setting” page
shows up.
3. Select the port that you are going to configure from the drop list.
4. Give the priorities as high or low for each Priority Tag types.
5. Click the “Apply” button again to execute your configuration.