Generic modem control, Z - soft reset and restore profile, Syntax – Longshine LCS-8560C1 User Manual
Page 42: Defined values, Result codes, Fclass - select active service class

AT Commands for CX81801/CX06833/CX81300/CX06827 Modems Reference Manual
Conexant
102184B
3-2
3.2.1
Generic Modem Control
Z - Soft Reset and Restore Profile
This command causes the modem to perform a soft reset and restore (recall) the
configuration profile. If no
Syntax
Z
Defined Values
Decimal number corresponding to the selected profile.
0
Soft reset and restore stored profile 0.
1
Soft reset and restore stored profile 1.
Result Codes
OK
ERROR Otherwise.
+FCLASS - Select Active Service Class
This command selects the active service class (mode).
Syntax
+FCLASS=
Defined Values
Decimal number which corresponds to the selected service
class.
0
Select Data Mode (Section 3). (Default.)
1
Select Facsimile Class 1 Mode. (Section 4).
1.0
Select Facsimile Class 1.0 Mode. (Section 4).
8
Select Voice Mode. (Section 5).
10 Reserved.
Result Codes
OK
For
ERROR Otherwise.