Longshine LCS-8560C1 - Manual (Page 13)

&W0 Store the current configuration as profile 0.
nt configuration as profile 1
ions
TS? Read Selected S-Register.
cted S-Register. An S-Register can be selected by using the ATSn
command.
0 Number of Rings to Auto-Answer
The number of rings the modem waits for before it auto answers.
Default: 0 (Country dependent)
S6
pause after off-hook before blind dialing.
ange: 2-255 (rings)
Country dependent)
ing up.
pendent)
odem ignore spurious signals
uency as the carrier. Higher S9 values reduce the
Default: 6 (0.6 seconds)
&W1 Store the curre
.
4.3 S-Register Definit
A
This command reads and displays the sele
Sr=n Set Register r to n
S
Range: 0-255 (rings)
Wait Time before Blind Dialing
The time to
R
Default: 2 (Seconds,
S7 Wait Time before Carrier Detect
The time to wait for a carrier from the remote modem before hang
Range: 1-255
Default: 50 (Seconds, Country de
S8 Pause Time For Dial Delay
The time to pause for the pause dial modifier, “Comma”.
Range: 2-255
Default: 2 (Seconds, Country dependent)
S9 Carrier Detect Response Time
The time a signal is detected an qualified as a carrier. This timing lets your m
that are the same freq
Range: 1-255 6 tenths of a second