Longshine GFT150 Ver.2.0 - Manual (Page 5)

5
Temperature Monitor: CPU remote diode, one thermister close to center of
motherboard.
10/100M Ethernet
One VIA VT6103L FOR 10/100M LAN. RJ45 connector with link/act and
speed LED integrated.
Support wake-from-LAN on Standby mode.
The LAN connector is RJ45+USBx2 combo connector on rear panel.
PIDE
IDE controller build in VT8237R-PLUS support up to UltraDMA-133 .
One 40-pins box header (2.54mm pitch) supports 3.5”HDD, CDROM or
DVDROM.
One 44-pins box header (2mm pitch) supports 2.5”ATA device, or DOM
flash disk.
One CompactFlash-II socket on back side, shared with secondary IDE
channel.
CMOS:
On-board RTC with battery-back CMOS RAM
One 3-pins jumper to clear CMOS data.
Audio:
VIA VT1613 AC’97 chip on-board.
Two stack-up 3.5mm audio-jack on rear for audio line-out and MIC.
One CD-ROM audio-in 4-pins connector on-board.
Power Connector:
One ATX-20-pins Power connector.
Cash Drawer Connector:
Two RJ12 6pins connectors.
Cooling:
One CPU cooling FAN connector.
Four System cooling FAN connector.
Flat heat sink on top of VN800 chipset.
Customized cooler kit for CPU.