Longshine GFT150 Ver.2.0 User Manual
Page 43

43
[ Auto ] : The Data transfer from and to the device occurs multiple sectors at a
time if the device supports it .
[ Disabled ] : The Data transfer from and to the device occurs one sector at a
time .
PIO Mode
Allow the user to set IDE device support PIO mode
[ Auto / 0 / 1 / 2 / 3 / 4 ] : Set the PIO mode to Auto / PIO 0 / PIO 1 / PIO 2 / PIO
3 / PIO 4
DMA Mode
Allow the user to set IDE device support DMA mode
[ Auto / SWDMA0 / SWDMA1 / SWDMA2 / MWDMA0 / MWDMA1 / MWDMA2 /
UDMA0 / UDMA1 / UDMA2 / UDMA3 / UDMA4 / UDMA5 ] : Select DMA mode
AUTO : Auto detected
SWDMAn : SingleWordDMAn
MWDMAn: MultiWordDMAn
UDMAn : UltraDMAn
S.M.A.R.T.
S.M.A.R.T. stands for Self-Monitoring, Analysis and Reporting Technology
Supported .
[ Auto ] : Set S.M.A.R.T. controlled by operating system
[ Disable ] : Set S.M.A.R.T. function to disable
[ Enable ] : Set S.M.A.R.T. function to enable
32Bit Data Transfer
Allow the user to set IDE device support 32Bit Data transfer
[ Disabled ] : Disabled 32Bit Data transfer function
[ Enabled ] : Enabled 32Bit Data transfer function