Longshine GFT150 Ver.2.0 - Manual (Page 4)

4
Specifications
Processor Support:
One Socket 478 supports single Intel Pentium M Dothan series
processors.
Intel® Pentium® M Dothan, 2MB L2, FSB 533 MHz, 1.5 ~ 2.26 GHz
Intel® Celeron® M Dothan, 1MB L2, FSB 400 MHz, 1.3 ~ 1.7 GHz
VIA® C7-M(V4 BUS) base on 90nm core,128KB L2, 400MHz FSB.
System Memory:
One DDR2 DIMM 240-pins Socket support DDR2 533/400 unregistered
non-ECC up to 1.0GB.
Video Controller :
VN800 Integrated Graphic Engine.
One 15-pins D-sub female connector for CRT display.
One 40-pins 1.25mm pitch connector for dual 18/24-bits LVDS LCD
display.
Super I/O:
Winbond 83697HG LPC I/F super I/O chip.
Fintek F81216DG LPC I/F super I/O chip.
Four RS-232 serial ports as COM3~COM6 in D-sub 9-pins male
connector on near panel. Pin9 can be powered with 5V, 12V or as ring-in,
selected by jumpers.
One Parallel port support SPP/ECP/EPP mode in D-sub 25-pins female
connector on rear panel.
Two USB2.0 ports in 2x5 pin-header for front panel or internal USB
device.
Four USB2.0 ports on rear for external USB devices.
1xPS/2 keyboard and 1x mouse connector on a stack-up dual Mni-din
connector .
Two internal RS-232 ports, COM1~COM2 are in 2x5 / 10 pin / 2mm / pin
header. Pin9 can be powered by either 5V or 3.3V with a 3-pins jumper.
Hardware Monitor:
W83697HG integrated hardware monitor chip to monitor voltages,
temperature and FAN speed.