Lippert Components Bike Rack & Tire Carrier - Manual (Page 9)

3. With Stabilizing Bracket
perpendicular to rear outer wall of
RV, drill pilot holes (1/4”) into
outer RV wall using the two
bracket holes as guides (See
Fig. 6).
4. After pilot holes are drilled,
drill out holes to accomodate
mounting bolt size (5/16”).
5. Apply a silicon sealant into the holes before securing bolts (Fig. 7).
6. With socket, closed or open end wrench, secure bolt into wall.
Fasten securely being careful not to strip out hole.
Fig. 6
3/8” x 1” Lag Bolts
INSTALLING STABILIZING BRACKET (CON’T.)
Fig. 7
10