Level-up, Motorhome leveling troubleshooting guide – Lippert Components Level-Up Motorhome Leveling User Manual
Page 8
![background image](/manuals/698172/8/background.png)
Rev: 01.13.2015
Page 8
Level-Up® Motorhome Leveling Troubleshooting Guide
Troubleshooting
Error Mode
A. If an error occurs before or during operation, the error will be displayed in the LCD and an alarm
will sound. To reset all error or service displays, push ENTER.
B. All normal functions will be disabled when the system is in Error Mode.
LCD Display
What is Happening?
What should be done?
****ERROR****
Excess Angle
Coach not parked on level ground.
Zero point incorrectly calibrated.
Move coach to level ground prior to
starting auto level sequence.
Recalibrate Zero Point.
****ERROR**** External Sensor
Rear sensor shorted out or
disconnected.
Check wire connection or replace
sensor.
Out of Stroke
Jack has insufficient length to
complete the leveling procedure.
Check the disposition of the jack.
Low Voltage
Battery voltage dropped below 9.5
VDC during operation.
Turn engine on, check battery
voltage under load.
Function Aborted
A button was pressed on touchpad
during Auto Level operation.
Hit enter to acknowledge. Restart
procedure.
Unable to Finish Leveling
Excessive movement inside coach
during auto level sequence.
Discontinue movement inside coach
during auto level sequence.
Engage Park Brake
Parking brake not set prior to
starting auto level sequence.
Set parking brake prior to starting
auto level sequence.
Comm Error
Check Wiring
NOTE: Screen will not back light.
Wiring connections loose or faulty
between touchpad and controller.
Check connections, replace
communication harness if necessary.
****ERROR****
Retract Timeout
Return Levelers for Service
Parking Brake not engaged.
Engine is not running prior to
starting auto retract sequence.
Leaking hose or fitting.
Press Enter and Retract. Engage
parking brake.
Press Enter and Retract at the same
time to clear error. Turn engine on
and restart auto retract sequence.
Check for leaks, repair if necessary.
Press enter and retract to clear error.
Excessive Angle
Occurs only in manual mode when
the angle of the unit is too severe.
Use the manual functions to return
coach to a more level condition.
LEVEL-UP
®
MOTORHOME LEVELING
TROUBLESHOOTING GUIDE