Levana ERA - Manual (Page 13)

13
SETTING UP YOUR SYSTEM
Placement of the camera
This camera can be placed on a tabletop or hung from a screw on the wall above the area being monitored. Place the camera within
15 feet of the area being monitored for best picture results.
Connecting power to the camera
1. Connect the small end into the DC input on the back of the camera,
connect the other end of the adapter into an available wall outlet.
Mounting the camera on a tabletop safely:
1. Place the camera on a tabletop no less than 3 feet away from your
baby’s crib.
2. Feed the power cord down the back of the table or use wall clips (not
included) to secure the cord away so the baby cannot reach it.
3. Plug in the power cord, check the parent unit to ensure that you are
getting a good view of your child and there are no obstructions.
Note: Baby monitors and cameras with power cords should never be hung on or near the crib as it is a
strangulation hazard. Power cords should be kept no less than 3 feet away from the crib and the baby’s
reach at all times.
ENGLISH