Leslie Controls GP Pressure reducing valve - Manual (Page 14)

Page 14
NOTE 1: QUANTITY IS 12 FOR 1/2" TO 1" & 2" SIZES, 14 FOR 1-1/4" & 1-1/2" SIZES, AND 20 FOR 2-1/2" TO 4" SIZES.
NOTE 2: MATERIAL FOR 1/2" TO 2" SIZES IS CARBON STEEL/COMMERCIAL AND FOR 2-1/2" TO 4" SIZES IS CAST
BRONZE/ASTM-B61.
NOTE 3: 2-1/2" - 4" BOTTOM CAP IS FURNISHED COMPLETE WITH BOTTOM CAP BUSHING. PART NO.23A BUSHING
IS FURNISHED SEPARATELY FOR 1/2" - 2" SIZES.
NOTE 4: MATERIAL FOR 1/2" TO 2" SIZES IS DUCTILE IRON/STM-A395, GR. 60-4-18, AND FOR 2-1/2" TO 4" SIZES IS
CAST IRON/ASTM-A126, CL. B.
NOTE 5: QUANTITY IS 2 FOR 1-1/4" & 1-1/2" SIZES AND 4 FOR 2" SIZE.
NOTE 6: QUANTITY IS 6 FOR 3" SIZE AND 8 FOR 2-1/2" & 4" SIZES.
NOTE 7: MATERIAL IS SST/TEFLON FOR 1/2" TO 2" SIZES AND STELLITED SST FOR 2-1/2" TO 4" SIZES.
NOTE 8: ADAPTER NOT REQUIRED.
NOTE 9: INCLUDES EXTERNAL INTEGRAL ADAPTER FOR 1/2" TO 2" SIZES.
NOTE 10: 2 LEAVES, BOTTOM DIAPHRAGM HAS BLEED HOLE.
NOTE 11: VACUUM BREAKER VALVE, REFERENCE NUMBER A53951, MUST BE LISTED AS A SEPARATE LINE ITEM
WHEN ORDERING NEW GPK – 4V/ – 1V/ – 4VS/ – 1VS UNITS.
NOTE 12: MATERIAL FOR 1/2" TO 2" SIZES IS CAST IRON/ASTM-A126, CL. B, AND FOR 2-1/2" TO 4" SIZES IS CAR
BON STEEL/ASTM-A285, GR. C.
NOTE 13: MAIN VALVE COMPLETE MAY BE FURNISHED AS INDIVIDUAL PARTS.
FOR 1/2" TO 2" SIZES, SEE PART NUMBERS 30, 31, 32, 33, & 34.
FOR 2-1/2" TO 4" SIZES, SEE PART NUMBERS 30, 31, 34, 40, & 41.
+ RECOMMENDED SPARE PARTS.
* THESE PARTS SHOULD BE ON HAND, PLUS RECOMMENDED SPARE PARTS, WHEN OVERHAULING THIS
EQUIPMENT.
FOR CAST BRONZE GP TYPE DIRECT, DIAPHRAGM OPERATED REDUCING VALVES, SEE DRAWING 30/4.1.1.2.