LABEC M-MIA-LA - Manual (Page 54)

Ultrasonic milkanalyser
Operation manual 04.11.09 52/107
o
While holding it pressed, switch on the analyser’s power supply.
o
Release the button Enter.
o
Using the buttons Up/Down choose menu Settings and press
Enter.
o
Using the buttons Up/Down choose menu COM1 Mode and
press Enter.
o
With the right button (Up) choose COM1 Mode – Prn, press
Enter and leave the menu.
With the external keypad 4 digit identification number of the milk deliverer
may be entered (from 1 to 9999) and quantity of delivered milk in liters (from
0,1 to 9999.9) (accurateness up to 0.1 l). These data entering have to be
completed before starting measurement. Pressing the button Enter on the
keypad will display the following:
Enter Data
Del N:
Now enter the deliverer’s identification number. After pressing Enter on the
external keypad, the display shows:
Enter Data
Del N:xxxx
Liters =
Now, enter how many liters have been delivered and press the button Enter
on the external keypad the following is displayed:
Del N:xxxx
Liters=yyyy.y
Are you sure?
0-No Yes-Enter
Where:
хxxx
- entered by the operator identification number of the deliverer
yyyy.y - entered by the operator liters.