LABEC GW1060 - Manual (Page 41)

Rev. 00 GW2045 – GW1060 Manual Pag. 40 di 43
How to clean the filter unit – GW2045
It is necessary to inspect the central filter “D” regularly, and if necessary, clean it. To extract it, it is necessary
to grip the handle, turn it anticlockwise and lift it up as shown in the picture.
Push the central filter “D” from underneath to extract it from the micro-filter and separate the two parts that
make up the plastic filter, pressing the filter body in the area indicated by the arrows.
Remove the central filter by lifting it.
How to clean the filter unit – GW1060
The filtering unit consists of a circular filter with a filter cone, a micro filter and a coarse filter. To ensure
efficient operation of the machine it is extremely important to keep the filter clean. They must be inspected
frequently to remove deposits which may adversely affect operation.
fig. 18 – Chamber outlet filter unit – GW1060
Recommendations for correct maintenance of filters
• The filters must be cleaned using running water and a stiff brush.
• It is essential to clean the filters carefully according to the instructions given above: the glassware
washer will be unable to operate if the filters are clogged.
• At the end of cleaning, replace the filters carefully in their housing. To do not use wash cycles if the filters
have been removed.