Setup menu – LABEC GW1060 User Manual
Page 22
Rev. 00
GW2045 – GW1060 Manual
Pag. 21 di 43
SETUP MENU
SETUP menu, available functions:
1. Position 1: For dose of detergent in pump P1. Set the ml/litre required as dose of detergent with
maximum threshold allowed at 20ml/litre. In 1ml steps (increase/decrease by using buttons (5) and
(4)). P1 Default dosage is 5 ml/litre.
2. Position 2: Similar to Position 1 for P2, neutraliser. P2 Default dosage is 3 ml/litre.
3. Position 3: Similar to Position 1 for P3. P3 Default dosage is 0 ml/litre.
4. Position 4: Setting of hardness of water in °f, from 5 to 60 with 5°f steps. Default is a w ater
hardness of 40°f. Important parameter for the corre ct functioning of softener incorporated into
appliance.
5. Position 5: Choice for automatic opening of door at end of cycle. “ON” as default. ON and OFF
appear on the display in segments to select the two options.
6. Position 6: Printer language - to be selected from the various languages available; default is
English.
Selected Language
German
French
Spanish
Italian
English
Abbreviation on Display
dE
Fr
ES
It
En
7. Position 7: Demineralised water attachment, yes/no.
Demineralised water attachment Present Absent
Abbreviation on Display
dn
--
8. Position 8: Date-time (for details se paragraph DATE AND TIME SETUP).
It is possible to access and change the following parameters using programme selection and the
buttons (5) and (4):
Setup field
Year month day Time Minutes Seconds
Inactive
position
Inactive
position
Switch
position
1
2
3
4
5
6
7
8