Cadillac 2010 Escalade - Manual (Page 284)

SETUP : Press to change the default settings, see
“Using the RSE On-Screen Display (OSD) Menus” later
in this manual. There are four main menu screens, each
screen displays a menu to select different setting
options. The screens are:
1. General Setup — adjusts screen settings.
2. Audio Setup — sets the language.
3. Preference Screen — sets the subtitles and
parental controls.
4. Password Setup — allows a password to be set.
Press SETUP again to exit.
EJECT
X
: Press to eject or reload a disc.
DVD-Video Screen 3 : Press the DVD button located
under 3 to transmit IR codes for DVD mode on Video
Screen 3.
TV-Video Screen 3 : This button is not used with the
system.
DVD-Video Screen 4 : Press the DVD button located
under 4 to transmit IR codes for DVD mode on Video
Screen 4.
TV-Video Screen 4 : This button is not used with the
system.
SOUND AROUND ON/OFF : Press to turn the FM
Transmitter power on or off.
MUTE
>
(For DVD Only): Press to turn off the
headphone sound. Press again to turn the sound on
again.
PIX (Picture Selection) : Press to adjust the picture’s
On Screen Display (OSD). Each time this button is
pressed, the picture adjustment OSD, cycles through
bars for BRIGHTNESS, CONTRAST, COLOR, and
TINT. Use the right/left navigation arrows to adjust the
setting. This feature automatically shuts off id another
button is pressed or adjustments are not made within
six seconds.
SOUND AROUND SELECT: Press to select an FM
transmitter channel. The SOUND AROUND SELECT
lets the DVD audio play over the vehicle’s sound
system by tuning the radio to one of the six FM
frequencies listed below.
. CH1 : 88.3MHz
. CH2 : 88.7MHz
. CH3 : 89.1MHz
. CH4 : 89.5MHz
. CH5 : 89.9MHz
. CH6 : 90.3MHz
MENU : Press to enter the DVD disc menu while the
disc is playing.
Q
,
R
,
q
,
r
(Navigation Arrows): Press to navigate
through menus.
4-92