Battery replacement – Cadillac 2010 Escalade User Manual
Page 276
AUX (Auxiliary) : Press to switch the system between
the DVD player and an auxiliary source.
If the vehicle has a third row video screen, the
AUX button controls the source display on the
second row video screen, and the third row video
screen as described in the table below:
Aux Button
Press
Second Row
Screen
Third Row
Screen
Default State
(No Press)
DVD Media
DVD Media
First Press
Aux Video
Source
Aux Video
Source
Second Press
DVD Media
Aux Video
Source
Third Press
Aux Video
Source
DVD Media
Fourth Press
Return to Default
State
Return to Default
State
d
(Camera): Press to change camera angles on DVDs
that have this feature when a DVD is playing. The
format and content of this function varies for each disc.
1 through 0 (Numeric Keypad) : The numeric keypad
provides the capability of direct chapter or track number
selection.
\
(Clear): Press within three seconds after entering a
numeric selection, to clear all numeric inputs.
}
10 (Double Digit Entries): Press to select chapter or
track numbers greater than 9. Press this button before
entering the number.
Battery Replacement
To change the remote control batteries:
1. Slide the rear cover back on the remote control.
2. Replace the two batteries in the compartment.
Make sure that they are installed correctly, using
the diagram on the inside of the battery
compartment.
3. Replace the battery cover.
If the remote control is to be stored for a long period of
time, remove the batteries and keep them in a cool, dry
place.
Tips and Troubleshooting Chart
Problem
Recommended Action
No power.
The ignition might not
be turned ON/RUN or in
ACC/ACCESSORY.
The picture does not fill the
screen. There are black
borders on the top and
bottom or on both sides or
it looks stretched out.
Check the display mode
settings in the setup menu
by pressing the display
menu button on the remote
control.
4-84