Cadillac 2010 Escalade - Manual (Page 281)

STOP
c
: Press once to stop playing a DVD.
There is a pre-stop feature for DVD and video CD only.
This feature resumes playback of the disc where it was
stopped. Press the stop button once during disc
playback and
c displays on the DVD startup screen.
This icon disappears after a few seconds. Press the
stop button a second time, or eject the disc, to cancel
the pre-stop feature and to clear the disc position
memory.
SOURCE : Press to select between Monitor 3,
Monitor 4, or the AV INPUT.
Each video display screen can be adjusted
independently, as well as display information from both
DVD players and both A/V inputs.
Infrared Remote Sensor : Located in the top center of
the video display screen. Do not block the signal from
the remote to the sensor.
Infrared Transmitters : Located in the top center of the
video display screen. Do not block the signal from the
headphones to the transmitter.
Video Display Screen : Located on the back of each
headrest.
AV OUTPUT (Audio/Video Output Jack) : Located on
the lower left side of the screen and is identified on the
video screen panel as the AV OUTPUT.
Headphone Jack : Wired headphones can be plugged
into the headphone jack with one-eighth inch stereo
plugs.
AV INPUT: (Audio/Video Input Jack) : The audio/video
input jack is located below the video display screen and
allows viewing of auxiliary sources such as portable
DVD players, game stations, or video cameras, on each
screen.
. Video Input — The yellow connector is used for
video input.
. L Audio — The white connector is used for the left
side audio.
. R Audio — The red connector is used for the right
side audio.
Level Lock and Release Latch : The viewing angle of
the video screen can be adjusted by releasing the latch
and gently moving the screen. Then lock it into a secure
position.
4-89