KERN & SOHN KXE-TM - Manual (Page 40)

40 KXE-TM-BA_IA-e-1411
 Ensure that there are no objects on the weighing plate.
Wait for stability, then press .
After approx. 5 seconds the zero point adjustment is completed.


Cancel the adjustment with , the appliance returns into the menu.
 Having adjusted the zero point, „SPAn“ will be displayed, followed by the
currently set weight value for the adjustment weight.
 Either use the displayed adjustment weight or change it with
, and
(numerical input see chapter 2.1.1), the active digit is flashing.
 Place the indicated adjustment weight and wait for stability.
Acknowledge with .
After approx. 5 seconds the adjustment is completed.

• Cancel the adjustment with
, the appliance returns into the menu.
• Back to weighing mode, actuate adjustment switch.