KERN & SOHN KXE-TM - Manual (Page 17)

KXE-TM-BA_IA-e-1411 17
7.5 Switch-over weighing unit
The following setting must be allocated to a functional button (see chap. 9.).
Functional
button Setting
FNC-02 „1“
or
FNC-03 „1“
or
+
FNC-04 „1“
When pressing the functional button, the weight display changes
between „kg“ and „t“.
7.6 Weighing with taring
7.6.1 Determination of the tare weight by weighing
Deposit weighing vessel. Wait for stability, then press . The zero display, the
indicator
 above TARE and
NE T will appear.
The weight of the container is now internally saved.
Weigh the material, the net weight will be indicated.
After removing the weighing container, the weight of the weighing container appears
as negative display.
The taring process can be repeated any number of times, e.g. when adding several
components for a mixture (adding). The limit is reached when the whole weighing
range is exhausted.
To change between gross weight and net weight, press .
To delete the tare value, remove load from weighing plate and press .