KERN & SOHN EOB F User Manual
Page 22
EOB_F-BA-e-1310
22
Setting channels
(display unit)
+
(platform)
The balance has the possibility to set different channels. This
is particularly necessary if several platforms are inserted next
to each other. In this case failures may appear if not different
channels have been set. It is possible to select between 3
channels.
Setting channels on the display unit:
Set rocker switch next to the platform to „1“.
Switch-on display unit using ON/OFF button and wait for zero
display. The data receiving symbol flashes
The triangle displays the selected channel.
If the data receiving symbol does not appear, use the CH1-3
button to change to the correct channel
Setting the channels on the platform:
Switch-off platform (rocker switch on the side to „0“)
Actuate the dip switch at the lower side of the platform. (pin 4
is not used).
Platform 314,5 x 304, 5 mm:
Platform 550 x 550 mm:
- TEE 150-1 (2 pages)
- TCB 200-1 (2 pages)
- CM 60-2N (14 pages)
- TAB 20-3 (14 pages)
- TEB 200-1 (11 pages)
- EMB 100-3 (18 pages)
- EMB 500-1GN (16 pages)
- EMB 500-1BE (48 pages)
- DBS 60-3 (91 pages)
- DLB 160-3A (59 pages)
- DLT 100-3N (77 pages)
- MLB 50-3C (68 pages)
- MLS 50-3C (83 pages)
- ABS 80-4N (96 pages)
- ABT 120-4M (72 pages)
- AES 100-4C (119 pages)
- AES 100-4N (85 pages)
- AET 500-4 (189 pages)
- ALS 160-4A (78 pages)
- ALT 160-4B (94 pages)
- ECB 10K5 (16 pages)
- ECE 10K5 (12 pages)
- FCB 3K0.1 (36 pages)
- FCE 3K1N (15 pages)
- FFN 1K-4N (32 pages)
- FKB 6K0.02 (42 pages)
- FKB 8K0.1A (39 pages)
- FKT 6K0.1 (53 pages)
- FKT 60K1L (7 pages)
- FOB 1.5K0.5 (21 pages)
- GAB 6K0.05N (41 pages)
- GAB 6K-5P (39 pages)
- WTB 1K-4N (35 pages)
- FOB 500-1S (17 pages)
- FOB 0.5K-4NS (27 pages)
- IXS 6K-3M (109 pages)
- IXS 6K-3M Platform (9 pages)
- SFB 50K-3XL (53 pages)
- SFB 50K-3XL Addendum (6 pages)
- KFE-TM (58 pages)
- FXN 3K-3 (22 pages)
- IEX 6K-3MEU (13 pages)
- IEX 6K-3MEU Safety (11 pages)
- OEX (15 pages)
- OEX Safety (12 pages)