KERN & SOHN EOB F - Manual (Page 16)

EOB_F-BA-e-1310 16
9 Operation Mode
Start-up
Ensure that the channel at the platform corresponds to the
channel of the display unit (see section „Setting channels).
Moreover the distance between the platform and the display
unit must not exceed 10 m.
 Set rocker switch next to the platform to „1“.
 Press the ON/OFF key on the display unit.
The balance will carry out a self-test The balance is ready
for weighing when the weight display appears.
The data receiving symbol flashes
The triangle displays the selected channel
If the data receiving symbol does not flash, use the CH1-3
button to change to the correct channel
Should the balance not display exactly zero despite empty
weighing plate, press the TARE button. The balance will be
set to zero after a short standby time.
Switching Off
 Press ON/OFF button, the display disappears
 Set rocker switch next to the platform to „0“.