KERN & SOHN OEX - Manual (Page 12)

• Put the weighing pan on the platform balance.
• Position the mains adapter outside the hazardous area in which an explosive
atmosphere may be expected to be present (that is in a safe place).
• Connect the connecting cable (max. 20 m) to the mains terminal marked DC IN
on the display unit.
1. Mains connection
2. Connection cable
3. Marking PE conductor
4. Shielded load cell cable
5. Sticker power connection
• Prior to initial start-up, make sure that there is no risk of explosion –
that no explosive atmosphere is present. If it is obvious that the
balance is not working correctly, disconnect the balance from the
power supply, secure it and contact KERN customer services.
12 Doc.No.OEX-BA-e-1411