KERN & SOHN FOB 5K1S - Manual (Page 16)

FOB-S-BA-e-1311 16
9 Error messages
Battery empty
Insert new battery or connect
the balance to power supply
Weighing range exceeded
Remove load and if necessary
press to reset balance to
zero
Zeroing range not reached
Increase the load, if the error
message remains, please
contact your retailer
Software error Contact your retailer
10 Service, maintenance, disposal
10.1 Cleaning
Before cleaning, please disconnect the appliance from the operating voltage.
Please do not use aggressive cleaning agents (solvents or similar agents), but a cloth
dampened with mild soap suds. Ensure that no liquid penetrates into the device and
wipe with a dry soft cloth.
Loose residue sample/powder can be removed carefully with a brush or manual
vacuum cleaner.
Spilled weighing goods must be removed immediately.
10.2 Service, maintenance
The appliance may only be opened by trained service technicians who are authorized
by KERN.
Before opening, disconnect from power supply.
10.3 Disposal
Disposal of packaging and appliance must be carried out by operator according to
valid national or regional law of the location where the appliance is used.