KERN & SOHN FOB 5K1S - Manual (Page 11)

11 FOB-S-BA-e-1311
7 Operation
7.1 Simple weighing
Balance display Operation
 Start balance by pressing .
The balance will carry out a self-test.
„Wait for 0.0“ display
(example)
 Should the balance not display exactly „0.0“ despite
empty weighing pan, press the button.
The balance returns to „0.0“
 Place goods to be weighed on balance.
Wait until the stability display appears.
Read weighing result.
 To switch off the balance press shortly .
7.2 Taring
The dead weight of any weighing container may be tared away by pressing a button,
so that the following weighing procedures show the net weight of the goods to be
weighed.
Balance display Operation
(example)
 Deposit weighing vessel.
The weight of the container is displayed.
 Press
, the zero display appears.
The weight of the container is now internally saved.
(example)
 Place goods to be weighed in the weighing
container.
The net weight of the goods to be weighed is
displayed.