KERN & SOHN FCE 30K10N - Manual (Page 13)

FCE-N-BA-e-1220 13
7.4 Plus/minus weighings
Operation Display
 Switch on balance by pressing and wait for the
[0] display.
 Put the nominal weight on the weighing plate and tare
to [0] using the button.
(Example)
 Remove the nominal weight.
The nominal weight is displayed as negative display.
 Put the test objects subsequently on the weighing
plate, the respective deviation from the nominal weight
is displayed with the respective sign to „+“ and „-“.
(Example)
 Back to weighing mode by pressing the
button.