Baud rate, 10 data output rs 232 c, 1 technical data – KERN & SOHN FCB 24K2 User Manual
Page 32: 2 pin allocation of balance output bushing, Data output rs 232 c, Technical data, Pin allocation of balance output bushing, Vn t, Baud
Baud rate
0.0
g
Vn T
BAUD
The baud rate defines the transfer speed vie the interface, 1 Baud =
1 Bit/second.
Ö
In weighing mode keep the PRINT key pressed until [Unit]
appears.
Ö
Press
the
MODE key several times until „bAUd“ is displayed.
Ö
Acknowledge
using
SET key, the current setting is displayed.
Ö
Use
MODE key select the desired settings
9600 B 4800 B 2400 B 1200 B 19200
Ö
Use
the
SET key to confirm selection. The balance returns to
weighing mode.
10 Data output RS 232 C
10.1 Technical Data
•
8-bit ASCII Code
•
1 start bit, 8 data bits, 1 stop bit, no parity bit
•
Baud rate selectable at 1200, 2400, 4800 , 9600 and 19200 baud
•
Miniature plug-in necessary (9 pole D-Sub)
•
For operation with interface faultless operation is only ensured with the correct
KERN – interface cable (max. 2m)
10.2 Pin allocation of balance output bushing:
Front view:
5
1
9 6
Pin 2:
Transmit data
Pin 3:
Receive data
Pin 5:
Signal ground
FCB-BA-e-0911
32