K-Edge K13-030-31.8 - Manual (Page 2)

Parts Included:
 K13-030-31.8:

1x 31.8mm Clamp
 K13-030-34.9

1x 34.9mm Clamp
 K13-031-31.8

1x Chain catcher
 1x M5 x 20mm Titanium bolt
 K13-031-34.9
 1x Chain catcher
 1x M5 x 20mm Titanium bolt
 K13-032-31.8

1x 31.8mm Clamp
 K13-032-34.9

1x 34.9mm Clamp
Tools/Items Required:
 Metric Allen Set (4mm for mounting bolts)
 Torque wrench
Installation Steps:

General Clamp Installation (All clamp types)
1. Install the K-Edge Adapter Clamp onto the seat tube and loosely tighten clamp bolt.
2. Install front derailleur onto the K-Edge Adapter Clamp and torque to manufacturer's recommendations.
3. Adjust the front derailleur in accordance to the manufacturer's recommendations.
4. Tighten clamp mounting bolt and do not exceed the max torque specification of 2N-m on the clamp. Refer to the
picture below for adapter clamp installation
5. If a chain catcher is included, proceed to the next steps below for installation.