Clarion PE-2322B - Manual (Page 21)

20
ADX5655z
280-7452-00
MD Changer Operations
MD changer functions
When an optional MD changer is connected
through the CeNET cable, this unit controls all
the MD changer functions. This unit can control
a total of 2 changers (MD and/or CD).
Press FUNC button 7 and select the MD changer
mode to start play. If 2 MD changers are con-
nected, press FUNC button
7 to select the MD
changer for play.
∗
If “NO DISC” appears in the display, load MDs into
the MD changer.
Pausing play
1. Press Play/pause button @ to pause play.
“PAUSE” appears in the display.
2. To resume play, press Play/pause button @
again.
Switching disc titles and track titles
This unit can display disc titles and track titles
already entered on MDs.
∗
Titles cannot be entered for MDs with this unit.
1. Press DISP button 3 to display the title. The
disc title or track title is displayed.
2. Each time you press and hold DISP button
3 for 1 second or longer, the display toggles
between the disc title and the track title.
Note:
• If an MD is not input its disc title or a track title,
“ D TITLE” or “ T TITLE” appears in the display.
Selecting an MD
Each of the Direct button 1 corresponds to an
MD loaded into the MD changer. Press the
corresponding Direct button
1 (1 to 6) to select
the desired disc.
∗
If an MD is not loaded in a slot of the MD changer,
pressing the Direct button
1 corresponding to its
disc number is invalid.
Selecting a track
● Track-up
1. Press Right button ¥ to move ahead to the
beginning of the next track.
2. Each time you press Right button ¥ , the track
advances ahead to the beginning of the next
track.
● Track-down
1. Press Left button % to move back to the be-
ginning of the current track.
2. Press Left button % twice to move to the be-
ginning of the previous track.
Fast-forward/fast-backward
● Fast-forward
Press and hold Right button ¥ for 1 second or
longer.
● Fast-backward
Press and hold Left button % for 1 second or
longer.
Top function
The top function plays from the first track (track
No. 1) of the disc. Press the Direct button
1 (1
to 6) with the same number as the MD playing.
∗
If an MD is not loaded in a slot of the MD changer,
pressing the Direct button
1 corresponding to its
disc number is invalid.
Scan play
The scan play locates and plays the first 10 sec-
onds of each track on a disc automatically. This
function continues on the disc until it is canceled.
∗
The scan play is useful when you want to select a
desired track.
1. Press SCN button 5 to start track scanning.
“T-SCAN” lights in the display.
2. To cancel the scan play, press SCN button 5
again. “T-SCAN” goes off from the display and
the current track continues to play.
Disc scan play
The disc scan play locates and plays the first 10
seconds of the first track on each disc in the
currently selected MD changer. This function
continues automatically until it is canceled.
∗
The disc scan play is useful when you want to se-
lect a desired MD.
1. Press and hold SCN button 5 for 1 second
or longer. DISC indication 3 and “D-SCAN”
light in the display and the disc scan play
starts.
2. To cancel the disc scan play, press and hold
SCN button 5 again. DISC indication 3 and
“D-SCAN” go off from the display and the cur-
rent track continues to play.