Radio operations, Turning on/off the loudness, Basic operations fm reception – Clarion PE-2322B User Manual

Page 12: Changing the reception area, Listening to the radio, Tuning, Seek tuning

280-7452-00

ADX5655z

Radio Operations

Turning on/off the loudness

The loudness effect emphasizes the bass and
treble to create a natural sound tone. When you
are listening to music at a low volume, it is rec-
ommended to use the loudness effect.

1. Press and hold LOUD button

(

for 1 second

or longer to turn on the loudness effect. When
the loudness effect is turned on, “LOUD” lights
in the display.

2. Press and hold LOUD button

(

for 1 second

or longer to turn off the loudness effect.
“LOUD” goes off in the display.

Basic Operations

FM reception

For enhanced FM perfor mance the

tuner includes signal actuated

stereo control and Multipath noise reduction cir-
cuits.

Changing the reception area

This unit is initially set to USA frequency intervals
of 10kHz for AM and 200kHz for FM. When using it
outside the USA, the frequency reception range
can be switched to the intervals below.

●

Setting the reception area

1. Press FUNC button

and select the radio

mode (FM or AM).

2. While pressing RDM button

, each time you

press and hold the number “1” of the Preset
buttons

for 2 seconds or longer, the recep-

tion area switches from inside the USA to out-
side the USA or from outside the USA to in-
side the USA.

∗

Any station preset memories are lost when the
reception area is changed.

Listening to the radio

1. Press FUNC button

and select the radio

mode.

2. Press BAND button

and select the radio

band. Each time the button is pressed, the
radio reception band changes in the following
order:

FM1

➜

FM2

➜

FM3

➜

FM1...

3. Press Right button

or Left button

to tune

in the desired station.

Tuning

There are 3 types of tuning mode available, seek
tuning, manual tuning and preset tuning.

Seek tuning

1. Press BAND button

and select the desired

band (FM or AM).

∗

If “MANU” is lit in the display, press and hold
BAND button

for 1 second or longer. “MANU”

in the display goes off and seek tuning is now
available.

2. Press Right button

or Left button

to au-

tomatically seek to the next station.
When Right button

is pressed, the station

is sought in the direction of higher frequencies;
if Left button

is pressed, the station is

sought in the direction of lower frequencies.