Philips HD2528C - Manual (Page 4)

O n -S creen MENU C ontrols ( continued )
rQ
C able I------ f BEQINI-
TkJOTE: If you went
L 1 through First Time Setup
(page 3), this task has already
been completed for you.
You need to make sure that
the TV is set to pick up either
Cable TV stations or Antenna
signals. In other words, the
TV needs to know whether
you have connected a Cable
TV signal or a normal anten­
na to its ANTENNA plug (see
page 2).
Press the MENU (M)
button on the remote, then the
CH (+) or (-) buttons (or press
the M ENU A or ▼ on the TV)
to select the word CABLE
with the TV’s on-screen Arrow.
Press the VOL (+) or (-)
buttons (on the TV or the
remote) to select either:
YES- If you DQ have Cable
TV connected to the
TV. Channels 1-125
can be selected.
NO- If you have an Antenna
connected to the TV.
Channels 2-69 can be
selected.
, Press STATUS button on
the remote control to clear the
screen.
Try it out. g
Press the CHANNEL
(+) or (-) buttons and
scan the channels. CH
(+), (-) works only
after STATUS button
is pressed to clear the
screen (or M enu times
out - about 1 minute.)
Remember, to set the
TV to select the chan­
nels on your C able
system, or in your
area, see the "Auto
Programming" steps in
the SETUP section on
page 3 and “Adding
Channels ” in the sec­
tion below.
C hannel
A uto Programming (see
page 3) adds all the
channels it can find (on your
Antenna or Cable TV system)
into the TV's memory.
SavelD¿lete channels makes
it easy for you to add other
charmels, or drop unwanted
channels, from the list of
channels in the TV's memory.
I---- CBEQINl-
Press the MENU (M)
s,
Press Channel Number Press the VOL (+) button 5^ Press the STATUS button
button on the remote, then the buttons on the remote (or CH to SAVE the selected channel to clear the screen after adding
CH (-I-) or (-) buttons (or the A or T buttons on the TV) to number into memory. (or deleting) all the channels
M ENU A or T on the TV) to select the channel you want to Press VOL (-) button to you want.
select the word CHANNEL
with the TV’s on-screen Arrow.
SAVE (or DELETE.) DELETE a channel from
memory.
To SAVE a channel above 100, use the CH
AT buttons on the TV. The remote number
buttons only go up to channel 99.