Crestron electronic DIN Rail Control Processor DIN-AP2 - Manual (Page 29)

Crestron DIN-AP2 DIN Rail Control Processor
Problem Solving
Troubleshooting
The following table provides corrective action for possible trouble
situations. If further assistance is required, please contact a Crestron
customer service representative.
DIN-AP2 Troubleshooting
TROUBLE POSSIBLE
CAUSE(S)
CORRECTIVE
ACTION
Unexpected
response from
control system. Network devices
are not
communicating
with the control
system. Use Crestron Toolbox
to poll the network.
Verify network
connection to the
device.
Ensure that the
Cresnet cable that
supplies power is
securely plugged into
the NET connector. PWR LED does
not illuminate. Control system is
not receiving
power.
Verify that the power
supply is able to
provide sufficient
power to the DIN-AP2
and all other
connected Cresnet
devices.
(Continued on following page)
Operations & Installation Guide – DOC. 6662A DIN Rail Control Processor: DIN-AP2
• 25