Crestron electronic DIN Rail Control Processor DIN-AP2 - Manual (Page 15)

Crestron DIN-AP2 DIN Rail Control Processor
Connectors, Controls & Indicators (Continued)
# CONNECTORS
1
,
CONTROLS &
INDICATORS
DESCRIPTION
11 LAN
GREEN
LED
YELLOW
LED
PIN 8 PIN 1
(1) 8-wire RJ-45 with 2 LED
indicators
10/100BaseT Ethernet port
Green LED indicates link status
Yellow LED indicates Ethernet
activity
PIN SIGNAL PIN SIGNAL
1 TX + 5 N/C
2 TX - 6 RC -
3 RC+ 7 N/C
4 N/C 8 N/C
12 COMPUTER
Pin 1 Pin 2
Pin 4 Pin 3
(1) USB Type B female USB 1.1
computer console port
(2-meter cable included).
PIN SIGNAL PIN SIGNAL
1 +5 VDC 3 Data +
2 Data - 4 Ground
13 IR/SERIAL (1) 8-pin 3.5 mm detachable
terminal block; comprising (4)
IR/Serial output ports.
Max Wire Size: 1.5 mm
2
(16 AWG)
IR output up to 1.2 MHz
1-way serial TTL/RS-232
(0-5 Volts) up to 115.2k baud
Individual signal generator per
port, allowing simultaneous
firing of all ports
1. Interface connectors for NET, IR/SERIAL, COM 1, COM 2, I/O and RELAYS
ports are provided with the unit.
2. The DIN-AP2 can only be powered via the NET port. Be sure to use a Crestron
approved power supply as another may cause damage.
Operations & Installation Guide – DOC. 6662A DIN Rail Control Processor: DIN-AP2
• 11