Canon W8400 - Manual (Page 306)

5- 10
‹ TCP/IP Network Settings (Windows, Macintosh, UNIX)
トップ
Chapter 3
Printing by Objective
Chapter 4
Maintenance
Chapter 5
Using the Printer
in a Network
Environment
Chapter 6
Troubleshooting
Chapter 7
Operating the
Function Menu
Index
TOP
Contents
Chapter 2
Using Various Media
Chapter 1
Basic Use
„ Configuring the Printer Using the ARP/
PING Command
The printer MAC address is required to configure the
printer using the ARP/PING command. The MAC
address can be determined by a status print, from the
sticker on the internal printer network card, or from the
Information menu on the operation panel.
z Checking the Printer MAC Address
To find the MAC address using the Status Print, use the
following procedure to print the status print. Load roll
media of A3 size or greater before printing.
Note
z The MAC address can be found on the sticker on the
internal print network card, or by pressing the Online
button in the printer operation panel and selecting
MAIN MENU, Information, and then MAC Address.
1
If the printer power is off, press the Power
button to switch the printer on.
After a few moments, Online appears in the display.
2
Press the Online button to display MAIN
MENU.
3
Press [ ] or [ ] to select Test Print then
press [ ].
4
Press [ ] or [ ] to select Status Print, then
press OK button.
The printer settings information will be printed. When
printing has finished, Online is displayed and the
printer is ready to print.
Data
Information Power
Offline
Menu
Message
Online
Cleaning
(3 sec.)
Stop/Eject
(1 sec.)
MAIN MENU
Test Print
↓
Test Print
Status Print
MAIN MENU
Head Cleaning
Online
Cleaning
(3 sec.)
Stop/Eject
(1 sec.)