Avaya 3920 Wireless Telephone - Manual (Page 14)

2 Installing the Telephone
14 Install the Base Unit on a Desktop
User’s Guide
Install the Base Unit on a Desktop
This section provides procedures to install the base unit on a desktop or table.
If you want to mount the base unit on a wall, go to “Install the Base Unit on a
Standard Wall Plate” on page 16 or “Install the Base Unit Directly on a Wall” on
page 19 .
1 Plug one end of the 14-foot telephone cord into the “Line In” jack on the
base unit.
2 Plug the other end of the telephone cord into the telephone jack that is
connected to your PARTNER ACS.
Figure 2: Connect Telephone Cord
Telephone jack connected
to communications
system
Line In
jack