Canon IXUS 950IS - Manual (Page 13)

11
2. Press the shutter button fully to
shoot.
The shutter sound will play and the
image will record. The indicator will
blink green while the image is
recorded to the memory card.
„
Reviewing an Image Right After Shooting
After a shot is taken, the image appears in the LCD monitor for
approximately 2 seconds.
You can continue to display images regardless of the review duration
setting with the following procedures.
• Keeping the shutter button pressed after a shot.
• Pressing the FUNC./SET or DISP. button while the image is dis-
played in the LCD monitor.
To stop displaying the image, press the shutter button halfway.
Selecting a Shooting Mode
1.
Turn the mode dial to the desired mode (a).
„
, or modes
1. Press the FUNC./SET button (b)
2. Select a shooting mode using the or button (c).
3. Press the FUNC./SET button (d).
You can also use the touch control dial to make a selection.
Î See Indicators (p. 6) .
Î See the Advanced Guide: How to Use the IS Mode (p. 32).
Î
See the Advanced Guide for the various shooting methods
available.
Î See the Advanced Guide: Review (p. 24).
Î
See the Advanced Guide: Checking for Focus Right After
Shooting (p. 74).
Î See Erasing (p. 19) .
a
b d
c
Sh
o
o
tin
g