Canon A580 - Manual (Page 150)

148
Too much light is shining
directly into the camera, or
is being reflected off the
subject. z Change the shooting angle.
Flash is set to (Flash
on).
z Set the flash to (Flash off) (p. 59) .
Image contains noise.
ISO speed is too high. z Higher ISO speeds and (High ISO
Auto) setting may increase image
noise. For higher image quality, use
as low an ISO speed as possible
(p. 65) .
z In , , and mode in the
mode, the ISO speed increases
and noise can appear.
White dots appear on the image.
Light from the flash has
reflected off dust particles
or insects in the air. This is
particularly noticeable
when you increase the
aperture value using the
wide angle. z This is a phenomenon that occurs
with digital cameras and does not
constitute a malfunction.