Canon 65 - Manual (Page 24)

22
The camera indicator lights or blinks under the following
circumstances.
Green: Ready to shoot/Connected to computer/Display
Off
(p. 29)
Blinking Green: Camera starting up/Image recording/reading/
erasing/transferring (when connected to a
computer)
Orange: Ready to shoot (flash on)
Blinking Orange: Ready to shoot (camera shake warning)
* Camera beeps once if difficult to focus.
This camera is equipped with a power saving function. The power
will shut off in the following circumstances. Press the power button
again to restore power.
* This time can be changed.
The power saving function will not activate during a slide
show or while the camera is connected to a computer.
The power saving function settings can be changed
(p. 29) .
Indicator
Never do the following while a green indicator is blinking.
These actions may corrupt image data.
- Shake or jolt the camera
- Shut off the power, or open the memory card slot/battery
cover
Power Saving Function
Shooting Mode Powers down approximately 3 minutes after the last
control is accessed on the camera. The LCD monitor
automatically turns off 1 minute* after the last control is
accessed even if [Auto Power Down] is set to [Off].
Press any button other than the power button or change
the camera orientation to turn the LCD monitor back on.
Playback Mode
Connected to a Printer Powers down approximately 5 minutes after the last
control is accessed on the camera.