Char-Broil 463257010 - Manual (Page 23)

13
14
Insert hinge pin on bottom of doors into hole in bottom shelf. Press upper hinge pin in front brace, align hinge hole on top of
door, and release hinge pin into door.
Left door
Hinge pin
on bottom
of door
Top of
door
PRESS
Right door
23
Connect each of the wires from the main burner electrodes, and sideburner electrode into the back of the Electronic Ignition
Module. T otal (5) connections.
Connect the two wires(A and B) from the switch wiring harness into the back of the Electronic Ignition Module.
Wire
1
2
3
4
5
A
B
Total (2) connections.
ignition module
Electronic
Heat shield
Right side panel
A
Release the cap and nut from electronic ignition module. Attach electronic ignition module and heat shield to the cart right
side panel with the nut and cap, shown A.
Nut
Cap
NOTE: Switch terminals are larger than electrode terminals and should only be installed in location shown
as A, B. Do not untie the wires while attaching.