Char-Broil 463257010 - Manual (Page 22)

12
11
Inside of cart, insert left and right grease tray rails into slots beneath grease tray opening in upper back panel, shown A.
Attach right and left rails under front brace with two #8x3/8” self-tapping screws, shown B.
Insert front brace under control panel and between cart side panels. Make sure door hinge pins are on the top side and
facing the front. Secure using two 1/4-20x1½” screws, 7mm lock washers, and 7mm flat washers on each side.
NOTE: MAKE SURE THAT THE FRONT BRACE IS MOUNTED IN THE MOST DOWNWARD POSITION WHEN
ASSEMBLED TO CART.
Front brace 1/4-20x1½”
screw
7mm lock
washer
7mm flat
washer
Door
Hinge Pin
22
Cart lower back panel
Right rail
Left rail
Front Brace
Right rail
Left rail
#8x3/8”
self-tapping screw
Grease tray opening
for clarity of illustration
Note: some parts omitted
for clarity of illustration
Note: some parts omitted
A
B