Char-Broil 463257010 - Manual (Page 19)

6
On back of grill, place upper back panel between side panels and
above lower back panel. Secure upper back panel, in lower holes,
using one 1/4-20x1½” screw, 7mm lock washer, and 7mm flat
washer on each side. Do not fully tighten screws until side shelf
installation is complete in later steps.
5
19
Flange into Brackets
Fascia, right side shelf
Bracket
Insert flange on right side shelf into side shelf brackets on side of firebox.
Attach rear of shelf using one
1/4-20x1½” screw, 7mm lock washer, and 7mm
Attach right side shelf using four 1/4”-20x3/4” screws, 7mm lock washers,
7mm flat washers, 1/4” nuts, shown A.
flat washer in lower hole, shown B.
flat washer, shown C.
Attach front of shelf and fascia using one #8x3/8” self-tapping screw and large
1/4-20x1½”
screw
7mm lock
washer
7mm flat
washer
1/4-20x3/4”
screw
7mm lock
washer
7mm lock
#8x3/8” self-tapping
Large flat
washer
1/4”nut
washer
7mm flat
washer
7mm flat
washer
A
B
C
screw
Upper back panel
1/4-20x1½”
screw