CyberData VoIP Ceiling Speaker - Manual (Page 11)

9
Objectworld Communications Corp. • 308 Legget Drive • Ottawa, ON • Canada • K2K 1Y6 • T: 613-599-9698 • F: 613-599-7457
• www.objectworld.com
4 SIP Configuration
NOTE: This section does not apply to the VoIP speaker in conjunction with the VoIP Paging Server. Refer to TN084 –
CyberData VoIP Paging Server Configuration Guide for information about configuring the VoIP speaker with the VoIP Paging
Server.
4.1 Gathering Information
To configure the device, you need the following information.
SIP User ID: This is equivalent to the identity address that you want to associate with the device.
Authenticate ID: This is the SIP authentication identifier associated with the above identity. This is required
by any SIP end‐point to register with the SIP PBX.
Authenticate Password: This is the SIP authentication password associated with the above identity.
To determine the Authentication ID and Password, do the following.
4.1.1 Determining the Authentication ID and Password as the user (that owns the identity) in UC Client
1. Start UC Client.
2. Login as the user you want to associate to the device.
3.
In the bottom left pane, take note of the identity name.
4. Click the icon on the right and select SIP Authentication.
5. Record the User/login name and password from the following dialog because you will need it later to configure
the device.