CyberData VoIP Ceiling Speaker User Manual
Page 10
8
Objectworld Communications Corp.
•
308 Legget Drive
•
Ottawa, ON
•
Canada
•
K2K 1Y6
•
T: 613-599-9698
•
F: 613-599-7457
•
www.objectworld.com
To perform the upgrade
1.
Retrieve the latest firmware from the CyberData web site.
(
2. Unzip the file to the Objectworld TFTP folder (located in: X:\Program Files\Objectworld\UC
Server\Data\TFTP where X is the drive where the UC Server program files are installed)
3.
Open your browser and type the IP Address of the speaker.
4. When prompted, use the following default Web Access username and password:
Web Access Username:
admin
Web Access Password:
admin
5. Click the Upgrade Firmware button.
6. Enter the IP address of your UC Server in the TFTP Server IP field.
7.
Under New Filename, enter the filename of the rom file that you unzipped from the firmware zip file.
For example: 400‐romdisk‐spk‐sip.img
8. Click Upload File.
9. After the rom image file finishes uploading, repeat step 6 but upload the image file by entering the
filename of the image.
For example: 400‐image‐spk‐sip.bin
10. Click Upload File.
11. Click the reboot button.