Jaypro Sports BLCH-1021GR - Manual (Page 5)

© 2009 Jaypro Sports Equipment JSL-Inst036 Rev C 06-05-2009 5 of 12
2) Attach one frame connector bracket (6) to the backside of each 5-row frame using the
hardware shown (tighten hardware only finger tight until entire base frame is assembled).
3) Identify the top and front end of each 10 row base frame (5). Attach one lower base frame
(5) to each connector bracket, as shown in Detail 2A.
4) Install the 77” cross-bracing (3) to the lower frame in three locations as shown. Install
hardware where the braces cross (Detail 1B).
DETAIL 2A
FRAME CONNECTOR BRACKET (6)
10 ROW BASE FRAME (5)
3/8”-16 FLANGE HEX NUT, ZP (13)
3/8”-16 x 1-1/4” HEX HD CAP SCREW, ZP (16)
2A
5-ROW BLEACHER LEG (1)
X-BRACE x 77” L, 10 ROW BASE (3)
10 ROW BASE FRAME (5)
X-BRACE x 76” L, 3 RD ROW (4)
1A
1B